Description
ISHMAEL X FYNE Collaboration
Decorative Slip Casted Vase
White Stoneware/Glaze/Spray Paint
Detailed Process:
The process began with rolling out about 25 lbs of clay into a slab about 4 inches thick. The gas nozzle was then placed on top to outline the shape. The gas nozzle was then removed and about ¾ of an inch of the clay is dug out to fit half of the nozzle in for the first half of the mold. Before putting the nozzle into the clay every crevice of the nozzle was filled with clay to ensure no plaster leaked in. Murphy’s oil was then applied to the cottle boards surrounding the clay slab. Clamps are put in place to secure the boards, and more clay is used to fill in any cracks around the boards so plaster cannot escape. Once the USG No. 1 Pottery Plaster is mixed, it is then poured to cover the exposed half of the gas nozzle and an additional two inches to ensure the mold is sturdy. The mold sits until it is cool to the touch. The second half of the mold is created in a similar process.
The pieces themselves are created using Dry Stoneware that was mixed with other parts to create a consistent material. For each mold, a sieve is used to filter the slip into the vessel. That is then poured into the two-part mold, held together using banding straps. The slip sits for about 20 minutes and then the excess is poured out. Once this is complete, the mold sits for about 1.5-2 days. The banding straps are removed and one half of the mold is removed. I then cut around the edges of the other half to release the piece from the mold entirely. Once this is done, the pieces are trimmed, fired, sanded, glazed and then refired. Each piece is unique depending on the take of the mold that particular day, the consistency of the firing, and the layers of glaze applied.
My experience:
As someone who had never attempted to slip cast previously, this challenged me as an artist in more ways than one. Creating the mold was no easy feat, more materials were used than I had anticipated, the process is timelier than I could have imagined, and it has been a true labor of love. The temperature/humidity of the room has affected the molds at times, how the excess is poured out has also been a huge challenge. With the nature of this shape, vacuum issues when pouring out the excess can be difficult. I have learned that the trimming and firing process is crucial. Each piece in total takes about 2 weeks from the first pour to the final firing. I had to move with patience and understanding with the materials and myself. The number of hours put into this project are well into the hundreds.
This project all started from Ishmael being gifted a gas nozzle and putting a flower in it, as an impromptu studio vase. We decided to create ceramic versions of his idea or see if it may even be possible. While we both loved the artistic factor of this project, there also seemed no better time to create a statement piece that holds so much relevance to what is happening around us.